The XRbinary program needs the following input data files:

Five tables providing information about specific intensities and
gravity darkening: 
  IperpTable.dat
  LDTable.dat
  GDTable.dat
  ZzetaTable.dat
  IBBfilterTable.dat

A parameter file must be specified on the command line in
the form
    XRbinary.exe parfilename
The program writes out two files whose names are constructed
from parfilename:
    parfilename.SysPars    =  file with system parameters
    parfilename.LC         =  file with light curves.
The parfile is made up of keywords specifying the parameters
of the model.  The recognized keywords are:

Miscellaneous keywords:
   COMMENT=         Comment line
   blank line       blank lines have  no effect
   END              Terminates reading of parameter file
   VERBOSE=         ON or OFF
   DIAGNOSTICS=     keyword  diagnosephase  diagnoseband
                          keywords:
                             INSPECTINPUT
                             INSPECTSYSPARS
                             INSPECTSTAR2TILES
                             INSPECTDISKTILES
                             INSPECTYLIMITS
                             INSPECTESCAPE  phase bandpass
                             INSPECTHEATING
                             NOCHECKPARS

Keywords that control the basic properties of the model
   STAR1=           ON or OFF
   STAR2=           ON or OFF
   STAR2SPOTS=      ON or OFF
   DISK=            ON or OFF
   DISKRIM=         ON or OFF
   DISKTORUS=       ON or OFF
   INNERDISK=       ON or OFF
   DISKSPOTS=       ON or OFF
   ADC=             ON or OFF
   THIRDLIGHT=      ON or OFF
   IRRADIATION=     ON or OFF

Keywords referring to the orbital light curve.
   PHASES=          minphase   maxphase   deltaphase
   PHASEOFFSET=     phaseoffset
   BANDPASS=        FILTER  filtername
                       or
                    SQUARE  minwavelength  maxwavelength                 
   NORMALIZE=       OFF            
                     or
                    MAXVALUE   maxvalue
                     or
                    FITDATA  filtername
                     or
                    FITDATA  SQUARE minlambda maxlambda

Keywords referring to the whole system
   PERIOD=          period
   K2=              K2             \  One but only one of these
   M1=              m1             /  keywords may be be used
   MASSRATIO=       q=m2/m1
   INCLINATION=     syspars.i

Keywords referring to star 1
   STAR1LUM=        star1.L
   STAR1TEMP=       star1.T

Keywords referring to star 2
   STAR2TILES=      targetNtiles
   STAR2TEMP=       meanT
   STAR2ALBEDO=     albedo

   STAR2SPOT=       theta phi radius spotToverStarT 
                         (angles in degrees; multiple spots allowed)

Keywords referring to the accretion disk
   DISKTILES=       targetNtiles
   DISKE=           eccentricity
   DISKZETAZERO=    zetazero
   DISKALBEDO=      albedo

   MAINDISKA=       amin   amax
   MAINDISKH=       Hedge  Hpow
   MAINDISKT=       POWERLAW  Tpow  maindiskL
                        or
                    VISCOUS  maindiskL

   DISKEDGET=       Tedge Tspot  zetamid  zetawidth

   INNERDISKL=      innerdiskL
   INNERDISKT=      innerdiskT

   DISKRIMAWIDTH=   awidth
   DISKRIMPARS=     SINUSOID  Hmax Hmin ZetaHmax   Tmax Tmin ZetaTmax
                       or
                    POINT    Zeta_i   H_i   T_i

   DISKTORUSAZERO=  azero
   DISKTORUSAWIDTH= awidth
   DISKTORUSPARS=   SINUSOID  Hmax Hmin ZetaHmax   Tmax Tmin ZetaTmax
                     or
                    POINT    Zeta_i   H_i   T_i

   DISKSPOT=        zetamin  zetamax  amin  amax  newToverT

keywords referring to the ADC
   ADCLUM=          adc.L
   ADCHEIGHT=       adc.height

keywords referring to the flux from a "third light"
   3rdLIGHTPHASE=    thirdlight.orbphase
   3rdLIGHTFRACTION= FILTER  filtername  fraction
                      or
                     SQUARE  minwavelength  maxwavelength  fraction


keywords referring to the reading of files with observed
light curves:
   READDATA=         FILTER filtername filename
                      or
                     SQUARE minlambda maxlambda filename